16 Chapter 2 Adjusting Screen
4 Perform advanced adjustments for the following using the <Screen> menu of
the <Analog Adjustment>.
Adjust the clock, phase and position, in this order.
● To eliminate vertical b ars [Clock]
Procedure
1. Choose <Clock> f rom the <Analog Adjustment> menu, and press .
2. Adjust the clock with or .
Press slowly so as not to miss t he adjustment point.
3. Pre ss to exit the adjustment.
When blurring, icker ing or bars appear on the scree n after adjustment, procee d to [Phase] to remove ickering
or blurring.
● Remove ickering or blu rring [Phase]
Procedure
1. Choose <Phase > from the <Analog Adjustment> menu, and press .
2. Adjust the phas e with or .
3. Pre ss to exit the adjustment.
Attention
• Flicker ing or blurring may not be elim inated depending on your PC or g raphics board.
● To correct screen posit ion [Hor.Position] [Ver.Position]
NOTE
• Since t he number of pixels and the pixel positions are xed on t he LCD monitor, only one position is provided to
display images correctly. The position adju stment is made to shift an im age to the correct position.
Procedure
1. Choose <Hor.Position> or <Ver.Position> from the <Analog Adjustment> menu, and press .
2. Adjust the position w ith or .
3. Pre ss to exit the adjustment.