4-3. Setting Calibration Details [Setting]

Setting the mode to execute SelfCalibration [Mode Selection]

Set the mode to execute SelfCalibration.

Procedure

1.Choose <Setting> from the SelfCalibration menu, and press .

2.Choose <Mode Selection> from the Setting menu, and press .

3.Select the mode to change with or , and press .

4.Select “On” or “Off” with or.

5.Press to exit the adjustment.

NOTE

When CAL1/CAL2/CAL3is set to On, SelfCalibration can be executed.

When Other Modesis set to On, the monitor color reproduction area is updated and the display in each color mode will be adjusted as follows:

-In any mode other than CAL mode, the temperature is adjusted so that it is as close as possible to the specified value.

-In Adobe RGB/sRGB/EBU/REC709/SMPTE-C/DCI modes, the gamut values are adjusted so that they are close to each specified value.

Setting the calibration targets

Set the calibration targets for SelfCalibration.

Procedure

1.Choose <Setting> from the SelfCalibration menu, and press .

2.Choose <Target> from the Setting menu, and press .

3.Select the items to change with or , and press . The target setting menu is displayed.

4.Select the items to change with or , and press .

Setting Item

 

Setting Range

 

Setting

Brightness

30 - 250 cd/m2

Set the brightness of the monitor using

 

 

 

the brightness value (cd/m2).

White Point

Color

: 0.2400 - 0.4500 *1

Set the monitor White Point using the

 

coordinates

 

color coordinate or Temperature.

 

Temperature

: 4000 - 10000K (100K Unit)*2

 

 

Color Gamut

Native/User

 

Set whether to calibrate color gamut.

 

 

 

Native

: Color gamut calibration is

 

 

 

 

not performed.

 

 

 

User

: Color gamut calibration is

 

 

 

 

performed.

 

0.0000 - 1.0000

To calibrate the monitor color

 

(For each of Red/Green/Blue)

reproduction gamut, set the color

 

 

 

coordinates for red, green, and blue.

Gamma

1.6 - 2.7 (0.1 Unit)*3

Set the monitor gamma values.

*1 When the color coordinates are set, the temperature changes to [User].

*2 When the temperature is set, the x and y coordinates of the white point are set automatically. *3 These become [Fixed] when calibrating with ColorNavigator.

5.Adjust using or .

6.Press to exit the adjustment. The calibration targets are set.

Attention

Only set the color gamut calibration when the target color range is precisely known.

If ColorNavigator was used to calibrate the grey balance, do not change the gamma setting values.

NOTE

• The calibration targets set using ColorNavigator are set as the calibration targets for the monitor.

Chapter 4 SelfCalibration 33

Page 33
Image 33
Eizo CG245W user manual Setting Calibration Details Setting, Setting the mode to execute SelfCalibration Mode Selection