Conversion
All models are supplied set for use on group H natural gas. A conversion kit for LP gas is included with the appliance. See the instructions that are supplied with the conversion kit. After converting the appliance please attach the Gas Conversion sticker over the appropriate area of the data badge, this will identify the gas type the appliance is now set for.
This appliance is designed for domestic cooking only. Use for any other purpose could invalidate any warranty or liability claim.
You will need the following equipment to complete the cooker installation satisfactorily
STABILITY BRACKET
If the cooker is to be supplied with gas through a flexible hose, a stability bracket or chain must be fitted.
These are not supplied by with the cooker but are available at most builders’ merchants.
GAS PRESSURE TESTER
FLEXIBLE GAS HOSE
Must be in accordance with the relevant standards.
MULTIMETER
(for electrical checks)
You will also need the following tools:
1.Electric drill
2.Masonry drill bit
(only required if fitting the cooker on a stone or concrete floor)
3.Rawlplugs
(only required if fitting the cooker on a stone or concrete floor)
4.Steel tape measure
5.Cross head screwdriver
6.Flat head screwdriver
7.4mm & 3mm Allen keys
8.Spirit level
9.Pencil
10.Adjustable spanner
11.Screws for fitting stability bracket
Checking the parts
4 pan supports
Griddle plate
Grill pan and trivet
Levelling tool
Handyrack
Meat tin
4 Main oven shelves
Splashback & Plinth
Conversion kit from Natural gas to LP gas
27
