Using the Oven 19
End time 
To set when the oven is to switch off again.
Time 
To set, change or check the time
(See also section “Before Using for the First Time”).
3How to use the clock functions
•After a function has been selected, the corresponding function indicator flashes for about 5 seconds. During this period, the desired times can be set
using the | or | button. |
•When the desired time has been set, the function indicator continues to flash for approx. 5 seconds. After that the function indicator is then lit. The set time begins to run.
•Press any of the buttons to stop the audible signal.
•The desired oven function and temperature can be selected before or after the clock functions Cook time 
and End time 
are set.
•When the cooking process is completed, turn the oven function dial and the temperature selector back to the OFF position.
2Switching Off the Time Display
By switching off the time display you can save energy.
Switching off the time display
Press and hold down any two buttons until the display becomes dark.
Switching on the time display
Hold down any button until the time reappears in the display.
3The display can only be switched off if none of the clock functions Cook time 
, End time 
or Countdown 
is in use.
Countdown 
1.Press the Selection 
button repeatedly
until the function indicator Countdown flashes.
