Emerson Safety Instrumented Systems, 3051S Safety-Certified Identification, Rosemount 3051S

Quick Installation Guide

00825-0100-4801, Rev HA February 2008

Rosemount 3051S

SAFETY INSTRUMENTED SYSTEMS

Additional Safety Instrumented Systems information is available in the Rosemount 3051S reference manual (document number

00809-0100-4801). The manual is available electronically on www.rosemount.com or by contacting an Emerson Process Management representative.

3051S Safety-Certified Identification

All 3051S transmitters must be identified as safety-certified before installing into SIS systems.

NOTE

There are two versions of safety-certified 3051S pressure transmitters. For transmitters with a yellow SIS circuit board installed and output code B in the model number, please refer to Manual Supplement 00809-0700-4801.

To identify a safety-certified 3051S:

1.Connect a HART host to the transmitter.

2.Check the software to verify that the software revision is 7 or higher.

Fast Key Sequence - 1, 5

Revision #’s
Fld Dev Rev	7
Software Rev	7
Hardware Rev	16

3.Verify that option code QT is included in the transmitter model code.

17