Emerson manual Rosemount 3051S, Quick Installation Guide

Quick Installation Guide

Rosemount 3051S

00825-0100-4801, Rev HA February 2008

European Certifications

I1 ATEX Intrinsic Safety

Certificate No.: BAS01ATEX1303X II 1 G EEx ia IIC T4 (Ta = -60 °C to 70 °C)

-HART/Remote Display/Quick Connect/HART Diagnostics 1180

Table 2. Input Parameters
Loop / Power	Groups
Ui = 30V	All
Ii = 300 mA	All
Pi = 1.0W	All
Ci = 30nF	SuperModule™/Quick Connect
Ci = 11.4nF	With PlantWeb or Junction Box Housing
Ci = 0	Remote Display
Li = 0	All Except Remote Display
Li = 60 µH	Remote Display

Special Conditions for Safe Use (X)

1.The apparatus, excluding the Types 3051 S-T and 3051 S-C (In-line and Coplanar SuperModule Platforms respectively), is not capable of withstanding the 500V test as defined in Clause 6.4.12 of EN 50020. This must be considered during installation.

2.The terminal pins of the Types 3051 S-T and 3051 S-C must be protected to IP20 minimum.

N1 ATEX Type n

Certificate No.: BAS01ATEX3304X II 3 G EEx nL IIC T4 (Ta = -40 °C TO 70 °C)

Ui = 45 Vdc max IP66

26