Emerson manual Parameter Description Min Max Default Value, MSM400 Monit

Parameter		Description		Min.	Max.	Default
No.				value	value	Ex-Factory
P130		Span 1 @ 1MHz	Measured attenuation	-	-	0.0
P131		Span 1 @ 3.3MHz	Measured attenuation	-	-	0.0
P132		Span 2 @ 1MHz	Measured attenuation	-	-	0.0
P133		Span 2 @ 3.3MHz	Measured attenuation	-	-	0.0
P134		Span 3 @ 1MHz	Measured attenuation	-	-	0.0
P135		Span 3 @ 3.3MHz	Measured attenuation	-	-	0.0
P140		Date for Span 1		-	-	0
P141		Date for Span 2		-	-	0
P142		Date for Span 3		-	-	0
P150		Lab Value 1		-	-	0
P151		Lab Value 2		-	-	0
P152		Lab Value 3		-	-	0
P160		Max % Solids		-	-	-
P200		PV Units
		The PV units can be selected from a list
		(%, kg/hr, lb/hr,g/l, ppm, None)		-	-	%
P201		Density Units		-	-	%
P240		Description		-	-	-
		16 character user-defined description of application, say.			MSM400 MONIT
P241		Message		-	-	-
		User set up message for HART info			32 Chars
P242		Tag Number - Control Unit		-	-	-
		User-defined alpha-numeric entry up to 32 characters in			MSM40055
		accordance with HART. May be entered by keypad.
P250		Start On
		This parameter is used to set up the mode of start
		for a desludge operation and is selected from a list
		(Time, PV, Ext. Trig)		1	3	none
P251		Stop On
		This parameter is used to set up the mode of stop
		for a desludge operation and is selected from a list
		(Time, PV, Ext. Trig)		1	3	none
P252		Do not Start if
		This parameter is used to set up the mode 'do not start if'
		for a desludge operation and is selected from a list
		(Light sludge, Ext trigger)		1	3	not used
P253		Stop If select from list
		This parameter is used to set up the mode 'stop if'
		for a desludge operation and is selected from a list
		(Light sludge, Ext trigger)		1	3	not used
P254		Start Time #1
		The time of day that the first desludge cycle starts		00:00	23:59	7:00
P255		Interval #1
		The time interval for the first desludge cycle		00:00	23:59	1:00
P256		Start Time #2
		The time of day that the second desludge cycle starts		00:00	23:59	00:00
P257		Interval #2
		The time interval for the first desludge cycle		00:00	23:59	00:00
P258		Max retries			Not implemented
P300	P	Sensor Serial Number		-	-	-
		User-settable
P301	P	Sensor Type		-	-	-
P302		dB Damping		-	-	-
						IP258

34