2.2Further customisation using the SMART HHC
There are some other features of the control unit that can be changed at this stage:
Identity
The following parameters can be recalled from the “Info” menu, and those shown * below can be site configured :-
P701 | MESSAGE | *general purpose 32 character message |
P710 | TAG | *control unit identifier (8 characters) |
P700 | DESCRIPTION | *E.G. control unit application or location (16 char) |
P702 | DATE | Automatically updated on exit if changes made |
P722 | FINAL ASSY No. | Factory set – hardware assembly number |
P760 | SENSOR SERIAL No | Factory set – LVDT serial number |
P660 | PASSWORD | * 3 level password system. |
Simply enter any message or tag number as appropriate and the control unit will retain this information in memory for future identification. This is particularly useful if you are likely to interrogate the control unit using the HHC from a remote location.
Refer to Appendix D for more detailed information.
Units of Operation and Display
The units displayed on the display or the HHC when used can be changed from the default “%” using P610 accessible through the “Program”Engineer
IP258
40
