Emerson MSM400 manual Suspended Sensor Type MSM433, Mobrey Pipe Section Sensors

2.0SENSOR TYPES

2.1SUSPENDED SENSOR TYPE MSM433

20

R¾" (BS21:1973) ¾" BSPT

61

Standard gap = 150mm

102 22

30	Specify gap	30
	50 to 450mm

Material :	316 Stainless steel
Gap size :	100mm, 150mm, 200mm,
	300mm,	450mm
	(others on request)
Cable :	Dual twin-axial
Max. Pressure :	105 kg/cm2 (103 bar)

Temperature range : -40°C to + 70°C (others on request) Refer to Sensor safety data for intrinsically safe systems

Figure 3 : MSM433 Sensor and Specifications

2.2MOBREY PIPE SECTION SENSORS

The Mobrey pipe section is used as part of a pipeline transporting the slurry to be monitored. Each pipe section contains two sensors, installed with their faces accurately aligned and flush with the pipe inner wall, to avoid any excessive slurry or grease build up on the faces.

455

Retaining nut

Location pin

'O' ring

Sealing face

Material pipe section :	Malleable cast iron epoxy coated
Material sensors :	316 stainless steel
Drain fitting :	1" NPT
Mounting connection :	In line installation
Flanges :	DN100, DN150, DN200 to BS4772
	(others on request)
Max pressure :	10 Bar (PN10)
Temperature range :	-40°C to +70°C(for T6), +120°(for T5)
	(Others on request)
	Refer to Sensor safety data for intrinsically
	safe systems
Sensor cable :	Oil hose protected on pipe section,
	Screened twisted pair
Cable length :	7m dual twin-axial from junction box (others
	on request)
Cable junction box :	IP65 aluminium alloy

Figure 4 : MSM448 Pipe Section Sensors

IP258

7