Emerson MVME7100 Conventions, About this Manual, Notation, Description, bold, Courier + Bold

About this Manual

Conventions

The following table describes the conventions used throughout this manual.

	Notation	Description
	0x00000000	Typical notation for hexadecimal numbers
		(digits are 0 through F), for example used for
		addresses and offsets
	0b0000	Same for binary numbers (digits are 0 and 1)
	bold	Used to emphasize a word
	Screen	Used for on-screen output and code related
		elements or commands in body text
	Courier + Bold	Used to characterize user input and to
		separate it from system output
	Reference	Used for references and for table and figure
		descriptions
	File > Exit	Notation for selecting a submenu
	<text>	Notation for variables and keys
	[text]	Notation for software buttons to click on the
		screen and parameter description
	...	Repeated item for example node 1, node 2,
		..., node 12
	.	Omission of information from
	.	example/command that is not necessary at
		the time being
	.
	..	Ranges, for example: 0..4 means one of the
		integers 0,1,2,3, and 4 (used in registers)
		Logical OR
		Indicates a hazardous situation which, if not
		avoided, could result in death or serious
		injury
		Indicates a hazardous situation which, if not
		avoided, may result in minor or moderate
		injury
		Indicates a property damage message
		No danger encountered. Pay attention to
		important information
MVME7100 Single Board Computer Installation and Use (6806800E08A)			15