Emerson MVME7100 1 Front Panel LEDs, Controls, LEDs, and Connectors, Label, Function, Color

LEDs Controls, LEDs, and Connectors

3.3.2LEDs

The next table describes the LEDs on the front panel of the MVME7100. Refer to Figure 3-1 on page 47 for LED locations.

Table 3-1 Front Panel LEDs

Label	Function	Location	Color	Description
BFL	Board Fail	Front panel	Red	This indicator is illuminated
				during a hard reset and
				remains illuminated until
				software turns it off. The LED
				is controlled by bit 14
				(BDFAIL) of the VSTAT
				register in the Tsi148.
USR1	User Defined	Front panel	Red/Yellow	This indicator is illuminated
				by S/W assertion of its
				corresponding register bits in
				the Status Indicator Register.
				See the Programmer's Guide
				for further detail.
GNET1	TSEC1 Link / Speed	Front panel	Off	No link
SPEED			Yellow	10/100 BASE-T operation
			Green	1000 BASE-T operation
GNET1 ACT	TSEC1Activity	Front panel	Off	No activity
			Blinking Green	Activity proportional to
				bandwidth utilization
GNET2	TSEC2 Link / Speed	Front panel	Off	No link
SPEED			Yellow	10/100 BASE-T operation
			Green	1000 BASE-T operation
GNET2 ACT	TSEC2 Activity	Front panel	Off	No activity
			Blinking Green	Activity proportional to
				bandwidth utilization

MVME7100 Single Board Computer Installation and Use (6806800E08A) 49