Emerson instruction manual Installing the DIN Rail, Securing the ROC827 on the DIN Rail

ROC827 Instruction Manual

DIN Rail Catch

DIN Rail Mount

DIN Rail Mount

Figure 2-3. Back View of the ROC827

2.4.1 Installing the DIN Rail

To install the ROC827 using the 35 x 7.5 mm DIN rails:

1.Mount the lower DIN rail onto the enclosure panel.

2.Snap the upper DIN rail into the ROC827 upper DIN rail mounting blocks.

3.Place the ROC827 onto the lower rail that is mounted to the plane and ensure that the ROC827 (with the second strip of DIN rail still in its upper mounting blocks) is seated against the panel.

4.Fasten the upper strip of DIN rail to the panel.

Note: Following this procedure (which uses the ROC827 to provide the correct DIN rail spacing) ensures that the ROC827 is held securely in place.

2.4.2 Securing the ROC827 on the DIN Rail

When placed correctly, the DIN rail catches (see Figure 2-3) secure the ROC to the DIN rail. Place the catches according to the following configuration:

ƒROC827: One catch.

Issued Mar-06 Installation and Use 2-9