Emerson ROC827 Power Input Module Specification Sheets, Name Form Number Part Number

ROC827 Instruction Manual

7.Insert a plastic screwdriver behind the battery and gently push the battery out of the battery holder. Note how the battery is oriented: the negative side of the battery (–) is placed against the CPU and the positive (+) towards the + label on the battery holder.

8.Insert the new battery in the battery holder paying close attention to install the battery with the correct orientation.

9.Reinstall the CPU (as described in “Installing the CPU Module” in Chapter 2, Installation and Use).

10.Replace the CPU faceplate.

11.Replace the two screws to secure the CPU faceplate.

12.Replace the wire channel cover.

13.Review “Restarting the ROC827” in Chapter 6, Troubleshooting.

14.Apply power to the ROC827.

3.6Related Specification Sheets

Refer to the following specification sheets (available at www.EmersonProcess.com/flow) for additional and most-current information on the Power Input modules for the ROC827.

Table 3-18. Power Input Module Specification Sheets

Name	Form Number	Part Number
Power Input Modules (ROC800-Series)	6.3:PIM	D301192X012

Issued Mar-06 Power Connections 3-26