Enterasys Networks A2H254-16 manual Connecting a Fiber-Optic Cable Segment to MT-RJ Port

Connecting to the Network

Caution: Do not touch the ends of the fiber-optic strands, and do not let the ends come in contact with dust, dirt, or other contaminants. Contamination of cable ends causes problems in data transmissions. If the ends of the fiber-optic strands become contaminated, use a canned duster to blow the surfaces clean. A cleaning swab saturated with optical-grade isopropyl alcohol may also be used to clean the ends.

Precaución: No toque los extremos de los cables de fibra óptica y evite su contacto con el polvo, la suciedad o con cualquier otro contaminante. Si los extremos de los cables se ensucian, es posible que la transmisión de datos se vea afectada. Si nota que los extremos de los cables de fibra óptica se ensucian, utilice aire comprimido para limpiarlos. También puede limpiarlos con un estropajo embebido en alcohol isopropílico.

2.Insert the MT‐RJ cable connector into the MT‐RJ front panel port until it clicks into place.

Note: To remove the MT-RJ cable connector, press on its release tab and pull it out of the MT-RJ front panel port.

Figure 3-15 Connecting a Fiber-Optic Cable Segment to MT-RJ Port

1	MT-RJ cable connector	3 Front panel port Link/Activity LED
2	MT-RJ front panel port

3-24 Hardware Installation