Connecting to the Network
Connecting Fiber-Optic Cables to LC Mini-GBIC Ports
Warning:
Advertencia: Los
Warnhinweis:
This section describes how to connect
•a 1000BASE‐SX multimode fiber‐optic segment from the network or other devices to an LC port connector of a Mini‐GBIC (MGBIC‐LC01 or MGBIC‐LC03), or
•a 1000BASE‐LX single‐mode fiber‐optic segment from the network or other devices to an LC port connector of a Mini‐GBIC (MGBIC‐LC08 or MGBIC‐LC09).
Each fiber‐optic link consists of two fiber‐optic strands within the cable:
•Transmit (TX)
•Receive (RX)
The transmit strand from LC port connects to the receive port of a fiber‐optic Gigabit Ethernet device at the other end of the segment. The receive strand of the applicable LC port connects to the transmit port of the fiber‐optic Gigabit Ethernet device.
Enterasys recommends labeling fiber‐optic cables to indicate receive and transmit ends. Many cables are pre‐labeled, providing matching labels or tapes at both ends of each strand of cable.
SecureStack A2 Installation Guide