Enviro 1700 Fireplace Freestanding, C-11116, 1700 Insert Recommended Height for Flue Pipe

Installation

OUTSIDE AIR KIT:

It is mandatory to use outside air for installations in mobile homes.

A 4” (10.2 cm) fresh air adaptor kit is available. This adaptor can be installed either on the back pedestal or through the floor under the pedestal. The cover plate must be installed on the unit if your stove is located in a mobile home or if using outside air from the bottom.

Place the 1⁄4” mesh screen between the fresh air adaptor and the body of the pedestal (as shown to right).

NOTE: Fresh air connection to the unit must be a non-combustible pipe, example: 4” (10.2 cm) single wall aluminum flex pipe.

���� �� ��������

Figure 19: Fresh Air Adaptor onto the Back of the Pedestal.

NOTE: Remove the cover plate on the rear of the pedestal if room air is to be used for combustion air.

RECOMMENDED HEIGHTS FOR FLUE PIPE:

The minimum flue pipe height at sea level is 12 feet (3.7 m) straight up from top of the unit. For every 1000 feet (305 m) above sea level, 4% must be added to the overall height. Use Tables 7, 8, and 9 to calculate the required vertical rise required.

Table 9: Recommended Height for Flue Pipe.

Elevation		Minimum recommended flue pipe height for # of elbows
above sea
	(Note: No more than 2 offsets (4 elbows) can be used. 2x45°=1x90°
level
feet	0		2 x 15°	4 x 15°	2 x 30°	4 x 30°	2 x 45°	4 x 45°
0-1000	12.0		12.7	13.3	13.3	14.7	14.0	16.0
1000-2000	12.5		13.2	13.8	13.8	15.3	14.6	16.6
2000-3000	13.0		13.7	14.4	14.4	15.9	15.1	17.3
3000-4000	13.4		14.2	14.9	14.9	16.5	15.7	17.9
4000-5000	13.9		14.7	15.4	15.4	17.1	16.2	18.6
5000-6000	14.4		15.2	16.0	16.0	17.6	16.8	19.2
6000-7000	14.9		15.7	16.5	16.5	18.2	17.4	19.8
7000-8000	15.4		16.3	17.0	17.0	18.8	17.9	20.5
8000-9000	15.8		16.8	17.6	17.6	19.4	18.5	21.1
9000-10000	16.3		17.3	18.1	18.1	20.0	19.0	21.8
meters	0		2 x 15°	4 x 15°	2 x 30°	4 x 30°	2 x 45°	4 x 45°
0-305	3.7		3.9	4.1	4.1	4.5	4.3	4.9
305-610	3.8		4.0	4.2	4.2	4.6	4.4	5.1
610-915	4.0		4.2	4.4	4.4	4.8	4.6	5.3
915-1220	4.1		4.3	4.6	4.6	5.0	4.8	5.5
1220-1525	4.2		4.5	4.7	4.7	5.2	4.9	5.7
1525-1830	4.4		4.6	4.9	4.9	5.4	5.1	5.9
1830-2135	4.5		4.8	5.0	5.0	5.5	5.3	6.0
2135-2440	4.7		4.9	5.2	5.2	5.7	5.5	6.2
2440-2745	4.8		5.1	5.4	5.4	5.9	5.6	6.4
2745-3050	5.0		5.3	5.5	5.5	6.1	5.8	6.6

Table 10: Distance to add to

overall vertical height.

	Distance to add
Part used	feet	meters
45° elbow	1.0	0.3
90° elbow	2.0	0.6
“T”	3.0	0.9
1 foot
(0.3m) of	2.0	0.6
horizontal
run

Table 11: Examples of calculating overall vertical height required.

	Height
sea level with 2	13.3 ft (4.1 m)
x 30° elbows
one “T”	3.0 ft (0.9 m)
11⁄2 ft (0.6 m)	3.0 ft (0.9 m)
horizontal run
Total 1	19.3 ft (5.9 m)
4000-5000 ft
(1220-1525 m)	13.9 ft (4.2 m)
above sea level
one “T”	3.0 ft (0.9 m)
2 ft (0.6 m)	4.0 ft (1.2 m)
horizontal run
Total 2	20.9 ft (6.3 m)

23