3.Lower the back of the cover onto the computer and press down firmly on all edges of the cover to form a tight seal.
4.Turn the large screw on the back panel clockwise to secure the cover to the computer.
5.Reconnect the computer to the monitor, printer, keyboard, and any other peripheral devices you have. Then reconnect the power cable to the back of the computer and to an electrical outlet.
Post-installation Setup for Memory Cards
After you install an optional memory card, you need to configure your computer to use it. Follow these guidelines:
Cl Run the SETUP program to reset your computer’s configuration to include the memory on your memory card. See Chapter 2 for instructions.
CL Use the setup program that comes with your memory card to configure the computer for use with your particular card. See your memory card manual for instructions.
Installing and Removing Options