3.Did you set the necessary jumpers on the main system board? See Chapter 5 for more information.
4.Did you run the SETUP program to update your configuration after installing the card? See Chapter 2.
5.If you used the option card to add an external device to your computer, did you use the proper cable to connect the device to the card’s connector on the back panel?
6.Did you perform the correct setup procedures for the software you are using with the option card? If necessary, see your software manual for instructions.
Mouse Problems
If you have trouble with your mouse, check the following:
1.Make sure that your mouse is securely connected to its port on the back of the computer. Also, make sure you have connected it to the correct port. See Chapter 1 for more information.
2.If the mouse is connected properly, make sure that jumper J4 on your computer’s main system board is set correctly for your mouse. See Chapter 5 for more information.
3.If you’re still having trouble, check the documentation that came with your mouse for any troubleshooting information, or contact your dealer.
D - 1 8 Troubleshooting