When you select a test category from the option line at the top of the menu, you see a submenu of the available diagnostic tests. For example, the submenu for the System board category appears when you first see the main menu because the System board option is selected.
The Run time parameters window, near the bottom of the display, lets you specify how you want to run the test(s).
The help window describes how to use these keys to make menu selections and run diagnostic tests:
Key
+
t 5 7
Enter
F2 F3 F4 F5 F6
Function
Move to the next test category
Move to the previous test category Move to the next test
Move to the previous test Start the test
Set the run time parameters Select a test or cancel selection Select all tests
Cancel all selections
Run all selected tests
A short message describing each test appears at the bottom of the screen.
Performing System Diagnostics