7.To replace the front panel, fit the three ridged tabs on its bottom edge into the three notches on the lower edge of the computer, as shown below.

tabs

8.Tilt up the front panel until the clips on the top touch the computer. Then push on the top of the panel until it clicks into place. Your diskette drive(s) should be flush with the front of the panel.

9.Follow the steps on page 5-43 to replace the computer’s cover. Then see “Post-installation Setup” on page 5-45 for instructions on configuring your computer for use with your new hard disk drive.

Installing and Removing Disk Drives

B-23