![](/images/backgrounds/113036/113036-261167x1.png)
Before you perform the following steps, be sure that you have set the jumpers on any hard disk drive(s) that you’ll be using. (If not, see “Setting the Hard Disk Drive Jumpers” on page
If you are adding a
Epson 3
The illustrations in this section show a diskette drive, but you can use the same instructions to install a hard disk drive.
Follow these steps to install a disk drive:
1.If you are installing a 5%inch diskette drive, turn it so that the diskette release latch is above the diskette slot.
If you are installing a 35%inch diskette drive, turn it so that the diskette release button is on the right and the drive light is on the left.
If you are installing a hard disk drive, turn it so that the side with the components is facing down.
Installing and Removing Disk Drives