Adjusting the Image

Once you see your image, you’ll need to make certain adjustments:

■To focus or zoom your image, see below.

■If the image is too high or too low, you can reposition it. See page 27.

■If the image isn’t square, see page 27.

■If only part of a computer image is displayed, you may need to press the Resize button. See page 28 for more information.

■If the projected image has vertical stripes or bands, see page 28.

Focusing and Zooming Your Image

Rotate the focus ring to sharpen the image.

focus ring

Rotate the zoom ring to reduce or enlarge the image.

zoom ring

If the image still isn’t large enough, you may need to move the projector farther away from the screen. You can also use the E-Zoombutton on the remote control to zoom in on a portion of the image. See page 35 for instructions.

26Using the Projector