Connecting to a DVI Video Source

The projector’s Digital Visual Interface (DVI) receives pictures directly from your computer in digital format. This lets the projector display images of greater clarity than can be achieved using a standard analog VGA connection.

To project images in digital video format, follow these steps:

1. Connect the computer’s DVI cable to the projector’s DVI port.

slide switch to right

Computer 1

DVI port

Computer 2 /

Analog Digital

 

Component Video

 

 

S-Video

 

 

Video L-Audio2-R

Audio 1

Audio Out

Remote

Control (RS-232C)

Mouse

 

2.Using the tip of a pen or a small screwdriver, slide the Computer 1 interface switch to the right to select Digital. (If you need to use the projector’s VGA port again, be sure to slide the switch back to the left.)

If you want to connect audio for this computer, use the projector’s Audio 1 port; if you want to connect a mouse cable (to use the remote control as a wireless mouse), use the Mouse port.

88Connecting to Additional Equipment