4.Use the down arrow (control panel) or Enter button (remote control) to select the number to which you want to assign the current settings.
5.Press Enter. When you see the “Overwrite?” prompt, select Yes and press Enter.
6.Press Esc to exit the menu system.
When you want to use a saved setting, press the Preset button on the remote control. You see the setting number displayed in yellow at the top right of the screen.
To select another number, press the Preset button again until the setting number you want is displayed. The projector resets itself according to the selected setting.
Adjusting the Sound
You can use the Audio menu to adjust the sound volume or treble/bass balance.
1.Press the Menu button. You see the menu screen.
2.Press the down arrow (control panel) or press down on the Enter button (remote control) to highlight Audio. You see the following:
Video | Volume | : | 0 |
Audio | Treble | : | 0 |
Effect | Bass | : | 0 |
Setting | Reset |
|
|
Execute | |||
User's Logo |
|
|
|
Advanced |
|
|
|
About |
|
|
|
Reset All |
|
|
|
:Select 
:Enter
3. Press Enter to select the Audio menu.
48