To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as 16-inch mode. See your Macintosh documentation for instructions.

Replace the cover and connect the adapter to the free end of the computer video cable. Then plug the cable (with the adapter) into the video port on your Macintosh.

4. Tighten the screws on the connectors.

Connecting the Mouse Cable

To use the remote control as a mouse follow the steps below. If the Macintosh has a USB port, you can use the USB mouse cable included with the projector. If it has a round mouse port, you’ll need a Macintosh mouse cable; see your projector dealer for help in obtaining the correct cable.

1.Connect the round end of the USB mouse cable (or a Macintosh mouse cable) to the projector’s Mouse port.

USB mouse cable

Mouse port

84Connecting to Additional Equipment