note
If you access the About menu when the projector display is set to video, you see only the lamp life and the video signal setting.
note
The lamp usage timer doesn’t register until you’ve used the lamp for at least 10 hours.
You see the lamp usage hours and computer display settings on the right:
Video | Lamp ON Time | : | 9999 H |
Audio | Video Source | : Computer | |
Effect | Frequency | : H 999. 99 KHz | |
Setting |
| : V 999. 99 Hz | |
User's Logo | Sync Polarity | : | H Positive |
Advanced |
| : | V Negative |
About | Sync Mode | : | Sync On Green |
Reset All | Resolution | : | 9999x9999 |
| Refresh Rate | : | 999. 9 Hz |
:Select 
:Enter
The life span of the lamp is about 1500 hours. If the number shown is close to 1500, make sure you have a spare lamp handy.
3. When you’re finished, press Esc.
Restoring the Default Settings
The Reset All option lets you return all the projector settings to their default values.
Video
Audio
Effect
Setting
User's Logo
Advanced
Execute
About
Reset All
:Select 
:Enter
Select Reset All and press the Enter button on the control panel or remote control to display the confirmation screen. Select Yes to reset all the default settings or No to cancel.
56