5.To install the new filter, first insert its tabs as shown, then press on the latch until it clicks in place.

tabs

note

You can check to see how many hours the lamp has been used. See page 55.

Replacing the Lamp

The projection lamp typically lasts for about 1500 hours of use. It is time to replace the lamp when:

■The projection image gets darker or starts to deteriorate.

■The lamp warning light is flashing red or orange.

■The message LAMP REPLACE appears on the screen when the projector lamp comes on (after about 1400 hours of use). To maintain projector brightness and image quality, replace the lamp as soon as possible.

Contact your dealer or call EPSON at (800) 873-7766 in the United States and Canada for a replacement lamp. Request part number ELPLP12.

60Maintaining and Transporting the Projector