caution

Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure.

6. Insert the new lamp as shown.

7.Make sure the lamp is fully seated, then tighten its screws.

8.Replace the lamp cover and tighten its screw securely. (The projector won’t come on if the lamp cover is loose.)

9.Reset the lamp timer as described in the following section.

Resetting the Lamp Timer

After installing a new lamp, you need to reset the timer so the projector can keep track of how many hours it has been used. Follow these steps:

1.Plug in the projector and turn it on (see page 22).

2.After the projection lamp comes on, press the Help button and hold it down for at least 5 seconds.

You see the Help menu, and then the following message:

Reset Lamp ON Time

Do you reset the Lamp ON Time?

YesNo

:Select :Execute

62Maintaining and Transporting the Projector