select computer 2 or component video

E@sy-MP

select video source

adjust

volume

select computer 1

Controlling the Picture and Sound

You can use the remote control to select your source, adjust the volume, temporarily turn off the picture and sound, freeze the action, zoom in on the picture, or display a picture-in-picture video image. Make sure you have set up your projector and connected your audio or video source as described in Chapter 1 or Appendix A.

Switching Between Picture Sources

If you’ve connected your projector to more than one computer and/or video source, you can use the buttons on the remote control (or the control panel) to switch between the different sources.

■Press the Video button to switch between a standard composite video source and an S-Video source.

■Press the Comp1 button to select your first computer.

■Press the Comp2/YCbCr button to select your second computer or a component video source.

After you select a source, the screen goes dark for a moment before the image appears.

Adjusting the Volume

If you’ve connected an audio source to the projector, you can adjust the sound that’s output through the projector’s speakers.

■To increase the volume, press on the right (+) side of the Volume button.

■To reduce the volume, press on the left (–) side of the Volume button.

34Using the Remote Control