18
Inserting and Removing Cards (EMP-765/755 only)
User’s Guide
Removal PROCEDURE
Press the eject button to the left of the card slot.
The eject button will pop out.
Press the eject button again.
Enough of the PC card will be ejected so that you can grasp the
edge of the card and pull it straight out of the slot.
CAUTION
•Do not remove the wireless LAN card while the access lamp on the
wireless LAN card is flashing green, this may damage the card.
• Do not remove a memory card while the access lamp of the
projector's card slot is flashing green, or while projecting a scenario.
Doing so may damage the memory card or data in the card.
• The PC card gets hot during and immediately after projector use.
Handle the card carefully when removing it from the card slot to
avoid personal injury or burns.
•When you wish to remove a memory card while using CardPlayer,
make sure you close CardPlayer before removal. CardPlayer may
malfunction if a memory card is removed without closing
CardPlayer first. s"Closing CardPlayer" in the EasyMP Operation
Guide
1
Eject button
Access lamp
2
CAUTION
Make sure you press the eject button back in to prevent it from being
broken or damaged.