33
Preventing theft (Password Protect)
User’s Guide
Turn "Power ON Protect" on.
(1) Select "Power ON Protect", and then press the [Enter]
button.
(2) Select "ON", and then press the [Enter] button.
(3) Press the [Esc] button.
"Timer" setting allows you to specify the time interval
for password prompt.
If you don't use this setting, proceed to step 4.
(1) Select "Timer" and then press the [Enter] button.
(2) While holding down the [Num] button, use the numeric
keypad buttons to enter the setting time within the range of
0 to 9999 hours and then press the [Enter] button.
If you make a mistake entering the time, press the [Esc]
button and re-enter the time.
When you have finished using the "Password Protect"
menu, the countdown for the elapsed time will start.
Turn "User’s Logo Protect" on.
(1) Select "User’s Logo Protect", and then press the [Enter]
button.
(2) Select "ON", and then press the [Enter] button.
(3) Press the [Esc] button.
Enter the password.
(1) To set a password, select "Password" and then press the
[Enter] button.
(2) The message "Change the password?" will be displayed,
so select "Yes" and then press the [Enter] button.
The default setting for the password is "0000", but you
should change this to your own desired password.
If you select "No", the screen shown at step 1 will be
displayed again.
(3) While holding down the [Num] button, use the numeric
keypad buttons to enter a 4-digit number. The number
entered will be displayed as "* * * *".
Once four digits have been entered, the confirmation
screen will be displayed.
(4) Re-enter the password.
The message "The new password is stored." will be
displayed.
If you enter the password incorrectly, a message will be
displayed prompting you to re-enter the password.
Once the setting is complete, press the [Menu]
button.
2
3
4
5
6
TIP
•When the set time has elapsed and the password is entered,
projection will start and the "Timer-elapsed" counter will be reset.
•Make a note of the password so that you do not forget it and keep it
in a safe place.
•If you lose the remote control, you will not be able to enter the
password. Keep the remote control in a safe place at all times.