38
User’s Guide
Turning the Projector Off
Follow the procedure below to turn the projector's power off.
PROCEDURE
Turn the power off for the signal sources that are
connected to the projector.
Check that the power for all connected components has been
turned off.
Press the [Power] button.
The following confirmation message will appear.
If you do not want to turn the power off, press any button except
the [Power], [Page down], [Page up] and [Num] button.
If you do not press any button, the message will disappear
automatically after seven seconds. (The power will not turn off
at this time.)
Press the [Power] button once more.
When the "pip-pip" confirmation buzzer sounds, disconnect the
power cable from the electrical outlet.
1
2
ProjectorRemote control
CAUTION
If the message "The projector is over heating. Make sure nothing is
blocking the air vent, and clean or replace the air filter." appears on
the screen, press the [Enter] button on either the projector's control
panel or on the remote control to turn the power off. "Cleaning the
Air Filters and Air Intake Vent". sp.99
3
Stops flashing and lights orange
CAUTION
Do not disconnect the power cable from the outlet while the Power
indicator is still flashing orange, otherwise it may result in errors in
projector operation and reduce the lamp unit operating life.