Epson 765, EMP-755 - page 40

39
Turning the Projector Off
User’s Guide
Attach the lens cover.
Attach the lens cover to the lens when not using the projector,
in order to prevent the lens from getting dusty or dirty.
TIP
•If the projection method has been set to "Front/Ceiling" or "Rear/
Ceiling", cool-down will start. The cool-down period lasts for about
10 seconds. When the "pip-pip" confirmation buzzer sounds,
disconnect the power cable from the electrical outlet.
•If you turn the power back on immediately after it has been turned
off, it will take longer than normal before images start to be
projected.
•If the Power indicator is flashing orange, operation of the [Power]
buttons is disabled. Wait until the indicator lights continuously.
•If "Standby Mode" in the configuration menu is set to "Network
ON", fans will continue operating. This is normal and does not
indicate a problem. (EMP-765/755 only)
4
Lens cover