65
Using the Configuration Menu Functions
User’s Guide
Projection Sets the projection position for the projector.
• Front : Select when the projector is in front of the
screen.
• Front/Ceiling: Select when the projector is in front of the
screen and suspended from the ceiling.
• Rear : Select when the projector is behind the
screen.
• Rear/Ceiling : Select when the projector is behind the
screen and suspended from the ceiling.
* If the projection method has been set to "Front/Ceiling" or
"Rear/Ceiling", cool-downg will be carried out for about
10 seconds when the power is turned off. After the "pip-
pip" confirmation buzzer sounds, disconnect the power
cable from the electrical outlet.
Front
Operation This lets you make settings related to projector operation.
Direct Power ON:
When the projector's power cable is connected, projection
starts without needing to press the [Power] button.
If the power cable is left connected to the electrical outlet
when "Direct Power ON" is set to "ON", the projector will
turn on if a power outage occurs and then the power is
restored.
Sleep Mode:
Sets the energy saving operation when no signal is being
input.
• When "Direct Power ON" is set to "ON", projection stops
automatically if no operations are carried out for 30
minutes while the "No Signal." message is being
displayed. (The Power indicator lights orange.)
• Projection starts again when the [Power] button is
pressed.
Direct Power
ON: OFF
Sleep Mode:
OFF
Sub-menu Function Default