66
Using the Configuration Menu Functions
User’s Guide
Sub-menu Function Default
Standby
Mode
(EMP-765/755 only)
Set to "Network ON" to use network monitoring and control
functions and the standby monitor out function while the
projector is in standby mode.
To enable the new settings, turn the projector's power off and
then turn it back on again.
* When set to "Network ON", the Power indicator will flash
orange and then remain orange after disconnecting the
power plug and reinserting it into the electrical outlet.
Network OFF
Link21L Sets whether the EMP Link21Lg utility software is being
used or not.
After changing the setting, turn the projector's power off and
then turn it back on again to enable EMP Link21L.
OFF
Language Sets the language for message displays.
•Press the [Enter] button on the remote control or on the
projector's control panel and then make the selection.
English
(Varies
depending on
country of
purchase)
Reset Returns "Display" and "Operation" settings in the
"Extended" menu to their default settings.
However, if "Background Color" has been set to "Logo" or if
"Startup Screen" has been set to "OFF", the settings will not
be returned to their defaults if "User’s Logo Protect" is set to
"ON". sp.33
•Press the [Enter] button on the remote control or on the
projector's control panel.
•To return all settings such as the "Image" and "Signal"
menu settings to their default values, select "Reset All"
from the "Reset" menu. sp.68
-