❏Place the printer on a desk. If you cannot place the printer on a desk, you will need the Stand. If you place your printer on a desk, follow the guidelines listed below.
❏Choose a desk that can hold the printer weight (about 49 kg) and has a height of
❏Make sure the surface is flat and stable.
❏Place the front rubber legs of the printer just at the end of the desk.
❏Leave enough room (over 600 mm) in front of the desk.
❏Prevent your printouts from getting dirty or crinkled.
❏Use a grounded power outlet. Do not use a damaged or frayed power cord. Avoid using an outlet that is shared with other appliances.
❏Use only an outlet that meets the power requirements of this printer.
❏Operate the printer under the following conditions:
Temperature: 10 to 35°C
Humidity: 20 to 80% without condensation
❏Avoid locations that are subject to direct sunlight, excessive heat, moisture, or dust.
❏Do not block the ventilation openings.
❏Avoid locations near potential sources of interference such as loud speakers or cordless phones.
❏Avoid locations near TVs, radios, air conditioners, or humidifiers.
❏Avoid locations that are subject to shocks or vibrations.
❏Keep the printer away from combustible substances.
❏Keep the printer away from dusty areas.
Deciding Where to Unpack the Printer
Before unpacking, read the followings:
❏Setup and assemble the printer near to the chosen place of use, as moving the printer may result in damage.
❏Allow floor space of 2.5 ⋅ 2.5 m approx., and height of at least two times that of the larger box containing the printer unit.
Unpacking the PrintercCaution:
The printer unit is heavy and unwieldy. Have two people unpack the printer.
1.Open the box containing the printer and remove the roll paper spindle with roll paper, polystyrene foam, and cardboard cushions from around the printer.
2. Remove the fixers from the sides of the box.
12