Tools:
F
G
H
I
F:Hex wrench
G:Hex socket head bolts (4)
H:Wing nuts, spring washers, and washers(2)
H is for connecting the printer unit to the base unit.
I:Paper feed support films (5)
Assembling the base unit
cCaution:
Have two people working on either side to assemble the base unit (20.5 kg).
1.Hold base upright left (A) and a horizontal strut as shown. Then fix the strut to the base using the two hex socket head bolts (G) with the hex wrench (F).
Note:
❏An instruction sticker about the setting paper basket is attached to the front of a base upright right.
❏Do not fasten the screws too tight. Leave a room to adjust the position when you fasten the screw on the other base upright.
G
A
2.Referring to step 1, secure the other side of the strut to the base (B).
3.Fasten four screws on the both sides of the base upright securely.
This completes assembly of the base unit. Before attaching the paper basket, mount the printer on the base unit.
Unpacking the printer
cCaution:
The printer unit is heavy and unwieldy. Have two people unpack the printer unit, and four people place the printer unit on top of the base unit.
1.Remove the roll paper spindle with roll paper, polystyrene foam, and cardboard cushions from around the printer.
English
7