Epson 7400, 9400, 9800, 7800 Accessories:, Assembling the Stand, 2.Assemble the left leg and left base in the same way as step

Accessories:

HI

JK

LM

H:Base bolts (4)

I:Strut bolts (2)

J:Hex socket head bolts with washers (10)

K:Collars (2)

L:Wing screws (2)

M:Washers (2)

Assembling the Stand

cCaution:Assembly requires two people. Be careful to match the right and left legs (R and L is engraved on the inner side of the base parts) and base parts.

1.Insert the right leg into the right base by sliding the leg slot onto the base projection as shown. Use the hex wrench to fasten the leg to the base with 2 base bolts (H).

H

2.Assemble the left leg and left base in the same way as step 1.

3.Insert the bottom horizontal strut into the right and left bases as shown. Use the hex wrench (G) to fasten the strut with collars (K) and strut bolts (I).

Note:

After assembling the bases and bottom horizontal strut, make sure that they are fastened tightly.

K K

I I

14