6.After inserting all ink cartridges in their corresponding slot, lower the ink levers. The printer starts initial ink charging.
7.After a while, ink lever messages appear on the LCD. Raise or lower the ink levers accordingly until READY appears on the LCD, which indicates initial ink charging is completed.
8.Close the ink compartment cover.
After installing all eight ink cartridges, the printer begins charging the ink delivery system and the Power light flashes (for about 10 minutes). When the ink delivery system is charged, the Power light stops flashing.
cCaution:
Never do the following while the Power light is flashing; otherwise damage may occur:
❏Turn off the printer
❏Open the front cover
❏Set the ink lever in the up position
❏Move the paper lever to the released position
❏Remove the maintenance tank
❏Unplug the power cord
❏Remove the ink cartridges
Loading the Roll Paper
To load the roll paper onto the printer, follow the instructions below.
1.Slide the movable flange off the end of the spindle.
2. | Place the roll paper on a flat surface so that it |
| ||||||
| unwinds in the direction shown. Slide the roll |
| ||||||
| paper onto the spindle and fully onto the fixed | English | ||||||
| flange. | |||||||
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3. | Slide the movable flange back onto the spindle |
| ||||||
| until it fixes into place in the end of the roll |
| ||||||
| paper. |
| ||||||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4. | Open the roll paper cover. Holding the |
| ||||||
| spindle, fit the left and right ends of the |
| ||||||
| spindle into the mounting brackets inside the |
| ||||||
| printer. |
| ||||||
Note:
The spindle and mounting brackets are
5. Make sure that the printer is turned on.
19