4.Insert the top horizontal strut into the right and left legs. Use a screw driver to fasten the strut with hex socket head bolts with washers
(J).
J
J
J
5.This completes assembly of the Stand. Make sure each part of the Stand is tightened securely.
2.Mount the printer on the printer mount as shown.
English
3.Fasten the bottom of the printer and the printer mount with wing screws (L) and washers (M)
M
Mounting the printer on the Stand
Caution: |
c Two or more people are required to mount the |
printer. Hold the printer at the indicated |
L
M
L
locations as shown. If the ink cartridges are |
installed, do not tip the printer at an angle. |
Otherwise, ink may leak from the cartridges. |
1.Lock the two casters and extend the two stabilizer knobs underneath the base unit.
Note:
Place the casters sideways and lock them so they will not move.
4.This completes the mounting procedure. Make sure the printer and the Stand are fastened together securely.
15