Epson 7400, 9400, 9800, 7800 Checking the Contents, Choosing a Place for the Printer, Unpacking and Assembling EPSON Stylus Pro 9800/9400

For EPSON Stylus Pro 9800/9400 only

For EPSON Stylus Pro 7800/7400 only

For EPSON Stylus Pro 9800/7800 only

A:Power cord

B:Roll paper spindle with the roll paper

C:Ink cartridges

D:Roll paper belt

E:Gray attachments

F:Paper guides

G:Black Ink Conversion Kit

❏Leave adequate room for easy operation, maintenance, and ventilation as shown below. (Values in the illustration below are the minimum.)

❏Leave at least 30 cm between the back of the printer and the wall.

❏Choose a location that can hold the printer weight (about 90 kg with base unit).

❏Make sure the surface is flat and stable.

❏Use a grounded power outlet; do not use a damaged or frayed power cord. Avoid using an outlet that is shared with other appliances.

❏Use only an outlet that meets the power requirements of this printer.

❏Operate the printer under the following conditions:

Temperature: 10 to 35ºC

Humidity:

20 to 80% without condensation

❏Avoid locations that are subject to direct sunlight, excessive heat, moisture, or dust.

❏Do not block the ventilation openings.

English