2.Lift the box up and away from the printer. Remove all items from the hollow (A and B) on the rear side of the printer.
Note:
The ink cartridges included with your printer are primarily for initial setup.
3.Take out the cardboard panels from the printer.
Mounting the printer on the base unit
1.Lock the two casters (J) and extend the two stabilizer knobs (K) underneath the base unit.
JK
Note:
Place the casters sideways and lock them so they will not move.
2.Position the base unit in front of the printer unit as shown.
3.Mount the printer on the base unit as shown below.
c Caution:
Do not attempt to lift the printer unit with fewer than four people.
Note:
When you place the printer on the base unit, match the right end square of the printer (shown as 4 in the illustration below) to the square of the same part of the base unit.
top view
8