4.Fasten the bottom of the printer and base unit with wing nut, spring washers, and washers

(H).

H

5.Release the front casters and the stabilizer knobs and move the printer to the place of use (a short distance away). Lock the casters and extend the stabilizer knobs after moving.

6.Remove the protective tapes.

a

b

C

a:from the front cover

b:from the ink compartment cover

C:from the maintenance tank

7.Open the front cover. Remove the protective screw (L) and metal plate (M) from the side of the print head compartment. (Follow the red wire (N) fixed on the cover of the printer and you can see the screw at the edge of the wire.)

Caution:

 

c Watch your fingers when opening and

 

closing the front cover.

English

 

L

 

M

 

N

 

L:Protective screw

M:Protective metal plate

N:Red wire

Note:

Do not re-install the screw and the metal plate. Store them separately to avoid losing them.

8. Close the front cover.

Attaching the Paper Basket

1.Fully insert and attach the upper basket hooks

(D) to the upper guides of the base upright left and right.

D

9