Make sure the camera is connected to your Macintosh, the computer is turned on, and the camera dial is turned to Play. Then follow these steps:

1Open the EPSON Photo File Uploader as described on page 7-8.

2Start your application and open the file to the image you want to capture.

NOTE

The entire desktop is captured, not just the active window. Make sure you make your document window as large as possible before you capture it. If you set your application to “slide show” mode (or the equivalent), you can capture just the image you want, without menus and other screen elements.

3Press the Command, Shift, and 3 keys on your computer keyboard at the same time. Your Macintosh names and saves the screen shot on your hard drive (not in a folder).

You can make as many screen shots as you’d like; simply repeat this step.

4When you are finished, close your application.

To upload your screen shots to the camera, click the EPSON Photo File Uploader window to make it active, then follow the uploading instructions starting with step 3 on page 7-5.

Projecting Your Presentation

You can display the uploaded images on a multimedia projector, television, or other video output device. Use the video cable that came with your PhotoPC 750Z.

NOTE

Using the optional AC adapter is highly recommended when you project your presentation. See pages A-1 and A-2 for instructions and ordering information.

7-10Using Your Camera for Presentations