Producing Your Printout

When you’re ready to print your picture, first make sure you have the correct paper or film loaded in the printer. (See your printer’s User’s Guide for paper loading instructions.) Then follow these steps:

1Highlight Print at the top of the Print menu and press the SEL button. You see a confirmation screen telling you how many photos are selected.

2Press the SEL button to continue printing or press ESC to return to the Print menu. The LCD screen goes blank and the display panel shows a star flashing across it while the picture is being sent to the printer. Then the printer starts printing the picture.

NOTE

If you want to stop printing a picture, hold down the ESC button for about 3 seconds. You see a message on the LCD screen that the printing is canceled, and then the Print menu reappears. The printer stops printing and ejects the paper.

3When you’re finished printing your picture(s), press the

ESC button several times to exit the Direct Print program. Turn the camera dial to Off and turn off the printer.

Printing a Card

This layout allows you to print a single 3.25 × 4.25-inch image on an A6-sized card (approximately 4 × 6 inches). EPSON Photo Quality Ink Jet cards are perfect for snapshots, photo greeting cards, and many other uses. You can also use this layout with A6-size glossy film.

These pictures show the way your printouts appear:

9

 

A6

A6

A6

A6

Top

Center

Bottom

Full-Size

 

 

Printing Directly From the Camera 9-11