When you’re using your camera with EPSON Photo!2, you can click the Setup tab to display the following dialog box:
You can change the Computer Connection settings as described on the following page and then click the Test Connection button.
◗Select another port if you want to change your connection. In most cases, it is best to leave the Port setting at Auto because EPSON Photo!2 can detect the camera connection automatically.
◗Select a different communication speed. EPSON Photo!2 automatically chooses the fastest speed that works with your system. This may actually be too fast for the configuration of your port. You may need to experiment to choose the best speed.
◗Click Test Connection to make sure your new settings work with your system.
◗Click the Set Time button to change the camera’s time and date settings.
You see a dialog box like the following: