3Follow steps 1 through 5 on page 1-8 to select continuous shooting.

4Press the timer button.

timer button

The timer icon appears on the display panel.

5Press the shutter button.

The timer icon and the red timer light on the front of the camera flash slowly for 8 seconds. Then they flash rapidly for 2 seconds before the shutter is released.

You have 10 seconds to get ready for “action” in front of the camera.

The camera beeps 16 times as it captures your images, and the red light flashes as the images are processed.

1

6To switch back to normal picture taking, follow steps 2 and 3 above, but turn off the continuous mode.

Taking Quick Shots

You can take as many images as the camera can temporarily store with quick shot mode. Normally, the camera takes a few seconds to process each image and you have to wait to take the next picture. In quick shot mode, the camera stores the images in its 4MB DRAM while you keep taking pictures. It saves the images to the internal memory or CompactFlash card after you are done.

Make sure the camera dial is set to View, and follow these steps to use quick shot mode:

1Press the SEL button to display the menus.

2Press or to display the Conditions menu:

Using Advanced Camera Features 1-9