NOTE

If you have problems formatting or using a memory card, try the following technical support numbers:

Lexar Media:

(510) 413-1200

SanDisk:

(408) 542-0400

 

 

Removing a Memory Card

Make sure the camera is turned off. Then follow these steps:

1Lift the cover open and press the Eject button on the bottom of the camera to eject the card, as shown below.

Eject button

memory card cover

2Remove the card by hand, then close the memory card cover.

CAUTION

Never remove the card while the camera is accessing it. Data in the card may be lost or damaged. Avoid using or storing the card in dusty places, in direct sunlight, or in places that become extremely hot or humid.

Getting Images From a Card to Your Computer

A PCMCIA adapter allows you to access images stored on CompactFlash cards directly from your computer or notebook/PowerBook.™ To use this adapter, your computer must be equipped with a Type II PCMCIA card slot.

If you’re using a Macintosh, you must enable the PC Exchange extension software to access files on CompactFlash cards. See your Macintosh documentation for information.

8-4Using CompactFlash Memory Cards