Removing Direct Print

If you installed Direct Print and aren’t using it, you can remove it to create more space for storing images. You can always upload the program later, using your PhotoPC 750Z software.

Follow these steps to remove the program:

1Slide the camera dial lock down and turn the camera dial to Play.

2Press the SEL button.

3Press the or button until you see the

Software Menu .

4Press the SEL button.

5Highlight Add/Delete and then press SEL.

6Press the button to highlight Delete and press

SEL.

7Highlight Direct Print V2.2 or Direct Print V2.3 and press SEL. The program is deleted.

8Press the ESC button several times to return to playback mode.

Reading Error Messages

If you see a message on the LCD screen or display panel while printing, check the following tables to resolve the problem.

Message

Explanation

 

 

Battery is low. Use AC

The camera’s battery power is almost out.

adapter.

Recharge or replace your batteries, or connect

 

the AC adapter to the camera.

 

 

Check Printer Model.

The camera is not connected to a compatible

 

printer. Connect the camera to one of the

 

printers listed on page 9-1 and then press the

 

SEL button to begin printing. (If you want

 

to cancel printing, press the ESC button for

 

3 seconds.)

 

 

No photos in memory

This message appears when there are no

 

photos in the camera’s memory. Press SEL to

 

return to the Print menu.

 

 

9-18Printing Directly From the Camera