5Go to the Color menu and select the color format you want to use for your printout. (See page 9-10.)

6To change the print mode, go to the Mode menu and select Fast or Fine. (See page 9-10.)

7When you’re ready to print your contact sheet, follow the steps under “Producing Your Printout” on

page 9-11.

Cleaning the Print Heads

If you notice that your photos are printing too light, or if dots are missing from an image, you can run a printer cleaning cycle from the camera. This standard maintenance procedure unclogs the nozzles in the print heads.

Follow these steps:

1From the Print menu, press the button until Head cleaning is highlighted.

2 Press the SEL button to start the cleaning cycle. The

9

LCD screen goes blank and the display panel shows a

 

star flashing across it while the cycle runs.

 

Cleaning takes about two minutes, during which the printer makes some noise and the power light flashes. When it’s finished, the LCD screen displays the menu again.

3Press the ESC button to exit the Direct Print program.

Printing Directly From the Camera 9-17